Home >
  1. Filaments
    Filaments At Mech Solutions, we have a verity of filaments to choose from. The majority of our filaments come from CCTREE though we do carry some ...
    Read more
  2. LD-001 Light-curing 3D printer
    LCD-001 Desktop light-curing 3D printer The material used for light-curing printing is called "photopolymer" and remain liquid at room temperatur...
    Read more
  3. CR-5S equipment instructions
    CR-5S Equipment instructions   Manual       Prepare before printing Connect the power supply, turn on the switch and install two...
    Read more
  4. Safety Sheet
    Safety sheet   Now that you’ve gotten a 3D printer there are a couple of safety tips that you should know about. First and foremost, avoid touchi...
    Read more
  5. Setting up your Ender-3

    This is a tutorial for beginners who’ve just purchased the Ender 3 and haven’t gotten it set up yet.

    Read more
  6. Creality Ender 3 3D Printer Review
    Much like the last few printers to come from Creality, the company claims easy assembly. For the Creality Ender 3, this means a 10-minute assembly with only 20 screws worth of work involved. In our past experience assembling the CR-10, we think it safe to imagine this rings true (though let us know in the comments if you find otherwise!).
    Read more
  7. Creality CR-10 Mini 3D Printer: Review the Facts Here!
    Will the Creality CR-10 Mini 3D Printer become as popular as it’s bigger brother, the Creality CR-10? Well, at least it has all the specs and features to make it a potential winner. Check out the facts on this not-so-small Mini 3D printer here.
    Read more
  8. Creality CR-10 S5 Review

    The CR-10 series of 3D printers all have large build areas, usually around 300mm³. The CR-10S S5 instead uses an incredible 500mm³ (20in³) build area, eclipsing the other printers in its series. The broad, heated glass print bed is a good foundation for printing models in a variety of filaments, including PLA, ABS, Carbon Fiber, Wood, PETG, and many more.

    Read more
$1 Days
$2 Hours
$3 Minutes
$4 Second
{"en":"New","fr":"Nouveau"} {"en":"Best Selling","fr":"Best Selling"} {"en":"Trending","fr":"Tendance"} {"en":"Deal","fr":"Traiter"}