faq-icon

Blog

Find the latest trends of 3D printers and best promotions with Mech E-Store

faq-icon
3D Slicer Settings for Beginner...
1. Layer Height  Layer height is essentially the resolution of your print. Prints that have a thinner layer height will create a more detailed print with smoother finishes. However, the downside t...
Flashforge Adventurer 3 3D Prin...
By Mark Kuhlmann   When I was presented with the opportunity to review the Flashforge Adventurer 3 I jumped at it. I’ve seen Flashforge printers around but I’ve yet had the chance to try one. Mec...
CR-10S vs CR- 10S Pro
3D PRINTER Comparison Creality Cr 10s vs Cr 10s Pro   Tech Specs CR-10S Printing Size : 300*300*400mm or 11.8"x11.8"x15.8" Printing accuracy:±0.1mm Nozzle :Standard 0.4mm(can be changed to 0.3/0.2...
Fun 3D Things To Print | 3D Pri...
Whew! I bet you are glad we got through our first month of the year! Despite the few snow storms, freezing conditions we are thrilled to see what the rest of the year has in store. To enhance the p...
The Best 3D Printer For Beginners
3D printing market has evolved over the past few decades, with more flexibility to the market there is a wave of hobbyist who are being encouraged to test the waters of the 3D world. All entry leve...
Filaments
Filaments At Mech Solutions, we have a verity of filaments to choose from. The majority of our filaments come from CCTREE though we do carry some other brands as well. We’ll split this up this sec...
LD-001 Light-curing 3D printer
LCD-001 Desktop light-curing 3D printer The material used for light-curing printing is called "photopolymer" and remain liquid at room temperature. After irradiation with UV light, Polymerization o...
CR-5S equipment instructions
CR-5S Equipment instructions   Manual       Prepare before printing Connect the power supply, turn on the switch and install two material racks respectively Feeding (Note: 1, be...
Safety Sheet
Safety sheet   Now that you’ve gotten a 3D printer there are a couple of safety tips that you should know about. First and foremost, avoid touching the nozzle well the machine is running. If you ...
Setting up your Ender-3

This is a tutorial for beginners who’ve just purchased the Ender 3. Having problems with setting up Ender 3? Useful information and helpful tips are here for you

3D Slicer Settings for Beginners - 5 Important Things To Know

1. Layer Height  Layer height is essentially the resolution of your print. Prints that have a thinner layer height will create a more detailed print with smoother finishes. However, the downside t...
  • Mech e store blog

Flashforge Adventurer 3 3D Printer Review

By Mark Kuhlmann   When I was presented with the opportunity to review the Flashforge Adventurer 3 I jumped at it. I’ve seen Flashforge printers around but I’ve yet had the chance to try one. Mec...

CR-10S vs CR- 10S Pro

3D PRINTER Comparison Creality Cr 10s vs Cr 10s Pro   Tech Specs CR-10S Printing Size : 300*300*400mm or 11.8"x11.8"x15.8" Printing accuracy:±0.1mm Nozzle :Standard 0.4mm(can be changed to 0.3/0.2...

Fun 3D Things To Print | 3D Printing Guide

Whew! I bet you are glad we got through our first month of the year! Despite the few snow storms, freezing conditions we are thrilled to see what the rest of the year has in store. To enhance the p...

The Best 3D Printer For Beginners

3D printing market has evolved over the past few decades, with more flexibility to the market there is a wave of hobbyist who are being encouraged to test the waters of the 3D world. All entry leve...
  • Mech e store blog
  • Tags: blogs

Filaments

Filaments At Mech Solutions, we have a verity of filaments to choose from. The majority of our filaments come from CCTREE though we do carry some other brands as well. We’ll split this up this sec...
  • Mech e store blog
  • Tags: blogs

LD-001 Light-curing 3D printer

LCD-001 Desktop light-curing 3D printer The material used for light-curing printing is called "photopolymer" and remain liquid at room temperature. After irradiation with UV light, Polymerization o...
  • Mech e store blog
  • Tags: blogs

CR-5S equipment instructions

CR-5S Equipment instructions   Manual       Prepare before printing Connect the power supply, turn on the switch and install two material racks respectively Feeding (Note: 1, be...
  • Mech e store blog
  • Tags: blogs

Safety Sheet

Safety sheet   Now that you’ve gotten a 3D printer there are a couple of safety tips that you should know about. First and foremost, avoid touching the nozzle well the machine is running. If you ...
  • Mech e store blog
  • Tags: blogs

Setting up your Ender-3

This is a tutorial for beginners who’ve just purchased the Ender 3. Having problems with setting up Ender 3? Useful information and helpful tips are here for you